AutoTest Combustible Gas Detector

STEP 1: Start & Calibrate
Turn on the AutoTest Combustible Gas Detector and allow the automatic calibration process to complete before testing.

STEP 2: Scan for Gas Leaks
Move the flexible probe around the area being inspected. The detector continuously monitors for combustible gases and displays readings in real time.

STEP 3: Identify & Respond
Review the gas concentration reading and monitor the audible and visual alarms. If a leak is detected an alarm will sound. Investigate the source and take appropriate corrective action.

• Detects combustible gas leaks quickly and accurately
• Fast response time for efficient inspections and maintenance
• Flexible probe enables testing in confined and difficult-to-access locations
• Audible and visual alarms provide immediate hazard notification
• Backed by local support, calibration and service

Gas Detection:

• Detected gases: Natural gas, coal gas and liquefied petroleum gas (LPG)
• Measurement range: 1 – 100% LEL / 20 – 50,000 PPM (based on C3 H8)
• Resolution: 1% LEL / 1 PPM

Performance:

• Response time: Approximately 2 seconds
• Accuracy: ±5% FS

Display & Alarms:

• Display: Colour LCD analogue and digital display
• Measurement units: %LEL and PPM
• Alarm type: Audible and visual alarms

• Light vehicles
• 4WD vehicles
• Heavy vehicles

Product Downloads

Click here for product software, manuals and brochures.