AutoTest® Brake Fluid Tester

STEP 1: Connect Tester
Start the vehicle and connect the tester to the battery. Insert the probe into the brake fluid reservoir, ensuring the sensor is fully submerged in the fluid.

STEP 2: Run Test
Press the test button and wait approximately 30 seconds while the AutoStop Brake Fluid Tester measures the brake fluid boiling point.

STEP 3: Review & Store
Review the boiling point result to assess brake fluid condition. Carefully remove the probe, wipe it clean with a cloth, replace the protective cap, and disconnect the battery leads. Do not touch the probe immediately after testing as it may be hot.

• Fast and accurate brake fluid testing in under one minute
• Measures boiling point to identify moisture-contaminated fluid
• Suitable for all grades of brake fluid, including racing fluids
• Simple one-button operation with guided LCD instructions
• Backed by local support and service

Measurement Performance:

• Measures brake fluid boiling point
• Results in less than 1 minute
• Suitable for new, used and racing brake fluids
• Maximum Temperature: up to 320°C

Display:

• LCD display
• Guided on-screen test instructions

Power:

• 12V vehicle battery powered

Operation:

• One-button operation
• Maintenance-free design
• No consumables required

• Light vehicles
• 4WD vehicles
• Heavy vehicles
• Forklifts
• Airport vehicles
• Farming and agricultural vehicles
• Mining vehicles

Product Downloads

Click here for product manuals and brochures.