AutoTest® Workshop Pro 10

AutoTest® Workshop Pro 10

The AutoTest Workshop Pro 10 is both a sophisticated, self-contained brake testing unit with an advanced workshop maintenance tool. Designed to test service and emergency brakes in cars, trains, buses, farming, and airport vehicles.

Compliant in Australia with roadworthy regulations in WA, QLD, VIC, SA, NT, NSW* & ACT. *

*IMPORTANT: For NSW ACT the Pedal Effort Sensor is an additional requirement to be compliant. Purchase our Workshop Pro 10 & amp, Pedal Kit for use in NSW and ACT.

  • 10.1” high-definition touch screen
  • Calculates and displays average and maximum deceleration, distance to stop, test speed and tri-axial deceleration
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13 • Price Competitive
  • Tablet: Ultra-lightweight (480g), compact (168 x 242 x 8.1mm) and portable
  • Pedal Effort Sensor: 500gms, 90x145x32mm
  • Robust construction
  • Android operating system
  • 32GB Storage
  • Micro USB for faster charging
  • Up to 7 hours of continual use
  • WIFI and Bluetooth interface
  • Card slot: microSD, up to 256 GB (dedicated slot)
  • Has WLAN (Wireless Local Area Network) to connect and communicate via Wi-Fi. Tablet does not support sim cards.
  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • Position acquisition time – 1 Min Maximum
  • 12-month licensing
  • 12-month warranty
  • 2-month calibration for tablet and Pedal Effort Sensor
  • Calibration that is internationally traceable through NATA
  • Built-in integrity check
  • Rechargeable, sealed, Li-Po battery, with low battery level indicator and automatic shut – down.
  • Comprehensive after-sales service and assistance

Input:

  • Tablet: Accelerometer: rated to less than ±1% over 0-1.5g
  • Pedal Effort Sensor: Load Cell: accuracy ±2%

Output:

  • Display: 10.1” (1920 x 1200) IPS with capacitive 10-point multitouch
  • Graphical output
  • Pedal Effort Sensor: Peak pedal effort

Analysis of test results:

  • GPS location of test (longitude/latitude)
  • Average and maximum deceleration
  • Test duration
  • Test speed
  • Stopping distance
  • Time to stop.
  • MFDD (Mean Fully Developed Deceleration)
  • Side shift
  • Stores over 1000 test results with WIFI, USB or Bluetooth

Power source:

  • Tablet: Li-Po 4850mAh rechargeable battery
  • Pedal Effort Sensor: AA batteries Standard accessories:
  • Pedal Effort Sensor* NSW & ACT requirement for compliant brake testing
  • Battery charger (Australia Only)
  • AutoTest Bluetooth printer
  • Velcro for case restraint
  • User Manual

Optional features:

  • Suction cups for use to secure on motorbikes, quad bikes, etc.
  • AutoLight PLUS software available to connect you AutoLight window tint tester 1.0 line/sec.

All light vehicles, 4WD vehicles, Motorbikes and quad bikes, Light mining vehicles, Farming and agriculture vehicles, Airport vehicles, Forklifts, Trains

No Upgrades

Product Downloads

Click here for product manuals and brochures.

Ultimate Roadworthy Kit Brochure
Renewing a License for AutoBrake Pro
First Time License Activation for AutoTest BrakePro
FAQ AutoTest Workshop Pro 10
FAQ AutoTest Bluetooth Printer
AutoTest WorkshopPro 10 Manual
AutoTest Workshop Pro 10 Brochure
AutoTest Bluetooth Printer Manual
AutoStop Pedal Effort Sensor Brochure

  • 10.1” high-definition touch screen
  • Calculates and displays average and maximum deceleration, distance to stop, test speed and tri-axial deceleration
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13 • Price Competitive
  • Tablet: Ultra-lightweight (480g), compact (168 x 242 x 8.1mm) and portable
  • Pedal Effort Sensor: 500gms, 90x145x32mm
  • Robust construction
  • Android operating system
  • 32GB Storage
  • Micro USB for faster charging
  • Up to 7 hours of continual use
  • WIFI and Bluetooth interface
  • Card slot: microSD, up to 256 GB (dedicated slot)
  • Has WLAN (Wireless Local Area Network) to connect and communicate via Wi-Fi. Tablet does not support sim cards.
  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • Position acquisition time – 1 Min Maximum
  • 12-month licensing
  • 12-month warranty
  • 2-month calibration for tablet and Pedal Effort Sensor
  • Calibration that is internationally traceable through NATA
  • Built-in integrity check
  • Rechargeable, sealed, Li-Po battery, with low battery level indicator and automatic shut – down.
  • Comprehensive after-sales service and assistance

Input:

  • Tablet: Accelerometer: rated to less than ±1% over 0-1.5g
  • Pedal Effort Sensor: Load Cell: accuracy ±2%

Output:

  • Display: 10.1” (1920 x 1200) IPS with capacitive 10-point multitouch
  • Graphical output
  • Pedal Effort Sensor: Peak pedal effort

Analysis of test results:

  • GPS location of test (longitude/latitude)
  • Average and maximum deceleration
  • Test duration
  • Test speed
  • Stopping distance
  • Time to stop.
  • MFDD (Mean Fully Developed Deceleration)
  • Side shift
  • Stores over 1000 test results with WIFI, USB or Bluetooth

Power source:

  • Tablet: Li-Po 4850mAh rechargeable battery
  • Pedal Effort Sensor: AA batteries Standard accessories:
  • Pedal Effort Sensor* NSW & ACT requirement for compliant brake testing
  • Battery charger (Australia Only)
  • AutoTest Bluetooth printer
  • Velcro for case restraint
  • User Manual

Optional features:

  • Suction cups for use to secure on motorbikes, quad bikes, etc.
  • AutoLight PLUS software available to connect you AutoLight window tint tester 1.0 line/sec.

All light vehicles, 4WD vehicles, Motorbikes and quad bikes, Light mining vehicles, Farming and agriculture vehicles, Airport vehicles, Forklifts, Trains

No Upgrades

Product Downloads

Click here for product manuals and brochures.

Ultimate Roadworthy Kit Brochure
Renewing a License for AutoBrake Pro
First Time License Activation for AutoTest BrakePro
FAQ AutoTest Workshop Pro 10
FAQ AutoTest Bluetooth Printer
AutoTest WorkshopPro 10 Manual
AutoTest Workshop Pro 10 Brochure
AutoTest Bluetooth Printer Manual
AutoStop Pedal Effort Sensor Brochure

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Stay ahead
with AutoTest!

Keep your workshop and equipment updated!
Subscribe to our newsletter for exclusive sales, discounts, and the latest news.

Sign up today!