AutoStop Pedal Effort Sensor

AutoStop Pedal Effort Sensor

Measures the force exerted on the brake pedal during brake tests. The pedal mounts quickly and easily using stainless steel clips. The sensor can be used with the Workshop Pro 10 or with other Bluetooth enabled devices using our custom software. Pedal force measurements are independent of the angle of the activation force.

AutoStop Heavy Brake Meter measures average and peak deceleration, stopping distance, test speed and the brake pedal pressure required to stop a vehicle.

There are 4 easy testing steps with AutoStop Heavy:

STEP 1
Secure the AutoStop Heavy in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.

STEP 2
Turn on the AutoStop Heavy and enter examiner’s ID and the vehicle’s registration number. Press Start. Accelerate the vehicle to the required speed.

STEP 3
Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.

STEP 4
After the vehicle has come to a stop, the AutoStop Heavy evaluates the brake performance and displays and prints the test results.

The AutoTest Heavy Brake Tester ensures compliance with the AS3450 standard and provides essential data for evaluating Brake performance in heavy and slow-moving vehicles, and mining vehicles. 

  • Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal-force required to stop the vehicle.
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13
  • Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number.
  • Price Competitive
  • Lightweight (3.0kg), compact (123 x 267 x 246mm) and portable
  • Robust construction that is water resistant and petrol, chemical and acid proof
  • Conventional (QWERTY) keypad lay-out, with tactile membrane cover.
  • LCD display
  • Adjustable display control
  • Both metric and imperial units of measurement
  • Built-in integrity check
  • Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut-down.
  • Internationally traceable Calibration (NATA)
  • 12-month calibration interval
  • 12-month warranty
  • Low-cost spare parts, accessories, and consumables
  • Comprehensive after-sales service and assistance
  • Internet support hotline
  • Position acquisition time – 1 Min Maximum
  • Software configurable

 

AutoTest Heavy Brake Tester Records:

  • Date and Time of Test: The AutoTest Heavy Brake Tester records the exact date and time when a brake test is conducted.
  • Machine Description: It captures entered details such as the machine’s serial number and machine hours.
  • Brake Testing Instrument Description: This includes information about the brake testing instrument used, including its model, version, calibration date, and traceability.
  • System Response Time (Brake Delay): The time it takes for the brake system to respond after the brake pedal is applied.
  • Brake Capability: Evaluates the overall braking capacity of the vehicle.
  • Brake Performance: Measures the effectiveness of the brakes during the test.
  • Initial Velocity/Speed: Captures the initial speed of the vehicle before braking.
  • Person Conducting Test: Records the individual responsible for conducting the brake test.
  • Person Verifying Test/Results: Documents the person who verifies the test results.

 

Optional features:

  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • USB and Bluetooth interface
  • Stores over 100 test results with USB or Bluetooth
  • Numerous user-entry hardware and software options
  • Graphical output

Input:

  • Load Cell: rated to less than ±1N, -1000N
  • Accelerometer: rated to less than ±1% over 0-1.5g

 

Output:

  • Display: 8-character LCD
  • Built-in printer (Dot Matrix)

 

Analysis of test results:

  •  Average and maximum deceleration
  • Test speed
  • Stopping distance
  • Time to stop
  • Foot pedal force

 

Power source:

  • 12V, 1.9AH, sealed-lead acid rechargeable battery

 

Printer:

  • Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
  • Ribbon: Epson type ERC-05
  • Ribbon life: equivalent to 2 paper rolls
  • Print speed: 1.0 line/sec

Passenger Cars, Light good Vehicles, Heavy Good Vehicles, Buses, Light Rail vehicles, Transit Vehicles

Gps, Bluetooth and USB

Product Downloads

Click the buttons below for FAQ, manuals and brochures.

Latest AutoStop Heavy Software Update v2.0.3
FAQ AutoStop Heavy
AutoStop Heavy User Manual
AutoStop Heavy Software Update 1.80 (for v9.13 & above)
AutoStop Heavy Brochure

AutoStop Heavy Brake Meter measures average and peak deceleration, stopping distance, test speed and the brake pedal pressure required to stop a vehicle.

There are 4 easy testing steps with AutoStop Heavy:

STEP 1
Secure the AutoStop Heavy in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.

STEP 2
Turn on the AutoStop Heavy and enter examiner’s ID and the vehicle’s registration number. Press Start. Accelerate the vehicle to the required speed.

STEP 3
Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.

STEP 4
After the vehicle has come to a stop, the AutoStop Heavy evaluates the brake performance and displays and prints the test results.

The AutoTest Heavy Brake Tester ensures compliance with the AS3450 standard and provides essential data for evaluating Brake performance in heavy and slow-moving vehicles, and mining vehicles. 

  • Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal-force required to stop the vehicle.
  • Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13
  • Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number.
  • Price Competitive
  • Lightweight (3.0kg), compact (123 x 267 x 246mm) and portable
  • Robust construction that is water resistant and petrol, chemical and acid proof
  • Conventional (QWERTY) keypad lay-out, with tactile membrane cover.
  • LCD display
  • Adjustable display control
  • Both metric and imperial units of measurement
  • Built-in integrity check
  • Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut-down.
  • Internationally traceable Calibration (NATA)
  • 12-month calibration interval
  • 12-month warranty
  • Low-cost spare parts, accessories, and consumables
  • Comprehensive after-sales service and assistance
  • Internet support hotline
  • Position acquisition time – 1 Min Maximum
  • Software configurable

 

AutoTest Heavy Brake Tester Records:

  • Date and Time of Test: The AutoTest Heavy Brake Tester records the exact date and time when a brake test is conducted.
  • Machine Description: It captures entered details such as the machine’s serial number and machine hours.
  • Brake Testing Instrument Description: This includes information about the brake testing instrument used, including its model, version, calibration date, and traceability.
  • System Response Time (Brake Delay): The time it takes for the brake system to respond after the brake pedal is applied.
  • Brake Capability: Evaluates the overall braking capacity of the vehicle.
  • Brake Performance: Measures the effectiveness of the brakes during the test.
  • Initial Velocity/Speed: Captures the initial speed of the vehicle before braking.
  • Person Conducting Test: Records the individual responsible for conducting the brake test.
  • Person Verifying Test/Results: Documents the person who verifies the test results.

 

Optional features:

  • GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
  • USB and Bluetooth interface
  • Stores over 100 test results with USB or Bluetooth
  • Numerous user-entry hardware and software options
  • Graphical output

Input:

  • Load Cell: rated to less than ±1N, -1000N
  • Accelerometer: rated to less than ±1% over 0-1.5g

 

Output:

  • Display: 8-character LCD
  • Built-in printer (Dot Matrix)

 

Analysis of test results:

  •  Average and maximum deceleration
  • Test speed
  • Stopping distance
  • Time to stop
  • Foot pedal force

 

Power source:

  • 12V, 1.9AH, sealed-lead acid rechargeable battery

 

Printer:

  • Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
  • Ribbon: Epson type ERC-05
  • Ribbon life: equivalent to 2 paper rolls
  • Print speed: 1.0 line/sec

Passenger Cars, Light good Vehicles, Heavy Good Vehicles, Buses, Light Rail vehicles, Transit Vehicles

Gps, Bluetooth and USB

Product Downloads

Click the buttons below for FAQ, manuals and brochures.

Latest AutoStop Heavy Software Update v2.0.3
FAQ AutoStop Heavy
AutoStop Heavy User Manual
AutoStop Heavy Software Update 1.80 (for v9.13 & above)
AutoStop Heavy Brochure

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Our History

From humble beginnings in 1983 we have been working with governments in many areas of vehicle safety.

Stay ahead
with AutoTest!

Keep your workshop and equipment updated!
Subscribe to our newsletter for exclusive sales, discounts, and the latest news.

Sign up today!