AutoStop Maxi Brake Meter

AutoStop Maxi Brake Meter measures average and peak deceleration, stopping distance, test speed and the brake pedal pressure required to stop a vehicle.

There are 4 easy testing steps with AutoStop Maxi:

STEP 1
Secure the AutoStop Maxi in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.

STEP 2
Turn on the AutoStop Maxi and enter examiner’s ID and the vehicle’s registration number. Press Start. Accelerate the vehicle to the required speed.

STEP 3
Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.

STEP 4
After the vehicle has come to a stop, the AutoStop Maxi evaluates the brake performance and displays and prints the test results.

• MOT Connected Equipment approved.
• Tests all MOT classes & all vehicle types.
• Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal-force required to stop the vehicle
• Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13
• Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number.
• Price Competitive
• Lightweight (3.0kg), compact (123 x 267 x 246mm) and portable
• Robust construction that is water resistant and petrol, chemical and acid proof
• Conventional (QWERTY) keypad lay-out, with tactile membrane cover.
• LCD display
• Adjustable display control
• Both metric and imperial units of measurement
• Built-in integrity check
• Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut-down.
• Internationally traceable Calibration (NATA)
• 12-month calibration interval
• 12-month warranty
• Low-cost spare parts, accessories, and consumables
• Comprehensive after-sales service and assistance
• Internet support hotline
• Position acquisition time – 1 Min Maximum
• Software configurable

Optional features:

• GPS or Glonass or Galileo positioning receiver, providing longitude and latitude.
• USB and Bluetooth interface
• Stores over 100 test results with USB or Bluetooth
• Numerous user-entry hardware and software options
• Graphical output

Input:

• Load Cell: rated to less than ±1N, -1000N
• Accelerometer: rated to less than ±1% over 0-1.5g

Output:

• Display: 8-character LCD
• Built-in printer (Dot Matrix)

Analysis of test results:

•  Average and maximum deceleration
• Test speed
• Stopping distance
• Time to stop
• Foot pedal force

Power source:

• 12V, 1.9AH, sealed-lead acid rechargeable battery

Printer:

• Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
• Ribbon: Epson type ERC-05
• Ribbon life: equivalent to 2 paper rolls
• Print speed: 1.0 line/sec

All Classes of vehicles (Test Classes I, II, III, IV, V, VI & VII)

Gps, Bluetooth and USB

Product Downloads

Click the buttons below for FAQ, manuals and brochures.